FR clothing is designed to protect workers from arc flash and flash fire, two hazards that can cause serious injury or death. In an arc flash, the amount of energy released is “quite significant,” with temperatures reaching between 10,000 and 20,000 degrees Fahrenheit, explains Dan Bowen, technical marketing specialist for DuPont Personal Protection.

“Even though the duration of an arc flash is usually fairly short, on the order of less than 1 second, the amount of intense heat will cause anything combustible to burst into flames almost immediately,” Bowen says. “There’s been a tremendous amount of people injured and killed by arc flash events that suffer badly because the clothing they were wearing caught on fire.”

Bowen explains that workers’ clothing plays a big role in the extent of their injuries in the event of an arc flash, especially if they are wearing a synthetic blend such as polypropylene or nylon blends.

“The challenge with those fabrics is not only will they ignite, but they’ll burn vigorously because they’re plastic,” Bowen says. “They are highly flammable. They melt, they burn, they drip. They make a bad matter much worse.”

When FR clothing is exposed to a heat source and that heat source is then removed, the garment will not continue to burn, Bowen explains. “That’s not to say these things are fire proof. It’s not like wearing cement or steel — they will undergo a physical change — but as soon as the heat source is gone, that fabric won’t burn. It’s designed to provide protection for the worker from that burn injury.”

Scott Margolin, international technical director at Westex Inc. adds that if a worker’s street clothes ignite, the fire and subsequent burn injuries will spread to areas of the body where the arc itself never touched.

“As silly as this sounds, you’re literally better off naked because the body burn injury you would suffer is going to be limited to the areas of the body where the arc hits. [If] your garments ignite, that fire is going to spread very rapidly,” he says. “As soon as the shirt ignites, you’re shifting from survivable or no injury with FR clothing, to potentially or probably fatal injury [without FR clothing] within seconds.”
FR clothing also provides protection through insulation, shielding the body from the heat of the event.
“The analogy that I like to make is you wouldn’t wear a windbreaker out into a blizzard, would you?” Margolin says. “If you know it’s 55 degrees out, you can put a windbreaker on and you’re going to okay. If it’s -55 degrees out, you’re not going to wear that same lightweight jacket — you’re dressing appropriately to that hazard, in this case cold.”


As with any PPE, workers and safety professionals must have a full understanding of the equipment to properly and safely use it. Misconceptions about FR clothing can be dangerous. For example, Margolin cites the erroneous belief that cotton is an upgrade from synthetic blend materials. While cotton doesn’t melt, wearing cotton garments in the event of arc flash or a flash fire could be deadly.

“Cotton ignites just as readily as poly cotton, and it burns hotter, meaning it will do more damage to your skin more quickly,” Margolin says. “It’s harder to extinguish and it’s typically heavier, which means more fuel for a longer fire. Cotton is not an upgrade. It does ignite, and it’s equally hazardous.”

Another troubling misconception is that workers need an FR shirt or jacket but not FR pants. Not wearing full protection, Margolin warns, is a dangerous move.

“You wouldn’t do that any more than you would wear half a hard hat or one lens of a safety glass, or just the right glove for shock protection but not the left one,” he says. “A shirt-only program is not a program at all. You’re not compliant, [and] you’re not going to save yourself the fatalities or medical costs.

Finally, Margolin stresses that not all FR is the same.

“Just because something has an arc rating doesn’t mean it’s a long-term, viable product, so we urge people to look for market-proven products,” he says. “There is no excuse in our business today to wear a garment where you have to count the launderings. There are plenty of fabrics out there that are flame resistant for the life of the garment. I would urge people to look for market-proven products.”

Bowen adds that when it comes to FR clothing and protection from flash fire, some safety professionals are content with doing only the bare minimum to remain compliant.

“With flash fire, everyone looks at the lowest possible denominator, but every place else they’re willing to step up and look at the hazard,” Bowen says. “Nobody skimps on respirators. Employers will purchase and mandate that their employees use the correct level of respiratory protection, but they don’t do the same thing with flash fire.”


Another commonly misunderstand aspect of FR clothing is how comfortable it can be.

“There’s a misconception that flame-resistant clothing is heavier, stiffer, scratchier or uglier than street clothing. That’s one of the reasons people don’t get it,” Margolin says. “We have been engineering for years trying to get lighter and lighter and softer and softer and more and more street looking. And with at least a few brands, we have gotten there.”

Lanny Floyd, principal consultant for electrical safety and technology at DuPont, agrees that FR garments today are being developed for higher performance and lower weight. “Over the last 10 years, there have been significant advances in the comfort and usability” of FR fabrics, he explains. Additionally, the face shields and hoods used in arc flash protection also have been improved.

To find the FR fabric and clothing that will be most comfortable for workers, Bowen suggests that safety professionals conduct a wear trial. Identify several different fabric types and garment manufacturers and obtain sample garments. Let workers wear these garments in real-life work situations so they can determine what feels best. “Look at the job that needs to be performed, look at the features you want on the garment, identify a few options, put it on people and let them wear it for a couple of months,” Bowen says.


Floyd also stresses that workers must know how to properly wear and use FR clothing. That means securing all fasteners, ensuring all body parts are protected, never rolling up sleeves and repairing any damage immediately and with the appropriate materials, such as FR thread.

Users also must follow the garment manufacturer’s instruction on care and cleaning. Don’t allow contaminated materials, solvent or grease that could ignite and degrade the performance of the protective clothing come into contact with the garments.

Finally, Floyd explains that one of the big areas of opportunities in the FR world is education on when and how to use these garments properly.
“That’s one of the big gaps I think we have today,” Floyd considers. “We have great products and great standards to improve safety for workers, but making sure people understand how to use it properly is always a challenge. Ongoing education is very important.”

Knowing the basics can do nothing but help improve the safety of workers. Following a few basic rules, research and try out the garments before you buy, and sticking with proven suppliers can go a long way in making your FR program a good and safe one.

Excerpts from January 2010 EHS Today magazine article by Laura Walter