65% Nomex® iiia aramid 35% fr rayon caution / read before use
Flammable contaminants will reduce the thermal protection of any flame resistant garment.
For maximum protection:
Wash your new garment before wearing and wash frequently thereafter to thoroughly remove potentially flammable contaminants.
Wearing undergarments is recommended with all flame resistant garments.
Anti-static garments of Nomex®IIIA should be used in conjunction with proper grounding procedures for maximum protection against the threat of spark. Do not remove garments when in a hazardous environment.
Garment Care
For correct fit, try garment on before washing or wearing.
Wash new garments before wearing and wash frequently thereafter.
Wash garments of Nomex®IIIA separately from other garments.
Machine Wash Hot (Max. 140°F/60°C)
Heavy Duty Detergent
Tumble Dry Low (Max. 160°F/71°C)
Do Not Use Chlorine Bleach
Do Not Line-Dry in Sunlight
advance ™ 40% Nomex®IIIA & 60% Kevlar®
caution / read before use
Flammable contaminants will reduce the thermal protection of any flame resistant garment.
For maximum protection:
Wash your new garment before wearing and after each subsequent wearing to thoroughly remove potentially flammable contaminants.
Wearing undergarments is recommended with all flame resistant garments.
Garment Care
For correct fit, try garment on before washing or wearing.
Wash new garments before wearing and after each wearing.
Wash garments of Advance® separately from other garments.
Machine Wash, Hot(Max. 140°F/60°C)
Heavy Duty Detergent
Flammable contaminants will reduce the thermal protection of any flame-resistant garment. For maximum protection:
Wash your new garment before wearing and after each subsequent wearing to thoroughly remove potentially flammable fabric processing aides / finishes, greases, oily soil and other flammable contaminants.
Wearing undergarments is recommended with all flame-resistant garments.
Garment Care
For correct fit, try garment on before washing and wearing.
Wash new garments of PBI/Kevlar® before wearing and after each wearing.
Wash garments of PBI/Kevlar® separately from other garments.
Pre-treat heavily soiled and stained garments with commercial stain remover (non-chlorine containing)
Machine Wash, Hot Water (Max. 140°F/60°C)
Heavy Duty Detergent (Wash pH 10 or lower)
Tumble Dry Low (Max. 160°F/71°C)
Maximum Drying Time-30 Minutes.
Remove Promptly
Do Not Bleach
Do Not Line-Dry in Sunlight
indura® ultra soft® Flame Resistant Fabric By WESTEX INC. 88% Cotton / 12% Nylon
NO CHLORINE BLEACH OR HYDROGEN PEROXIDE
EITHER SEPARATELY OR IN DETERGENTS.
DETERGENT ONLY. DRY CLEANABLE
WASH UP TO 165° (74°C)
