Flammable contaminants will reduce the thermal protection of any flame-resistant garment.
For maximum protection:
Wash your new garment before wearing and after each subsequent wearing to thoroughly remove potentially flammable contaminants.
Wearing undergarments is recommended with all flame-resistant garments.
Anti-static garments of Nomex® IIIA should be used in conjunction with proper grounding procedures for maximum protection against the threat of spark. Do not remove garments when in a hazardous environment.
Garment Care
For correct fit, try garment on before washing or wearing.
Wash new garments before wearing and after each wearing.
Wash garments of Nomex® IIIA separately from other garments.
Wash dark and light colored garments separately.
Machine Wash
Hot Water (Max. 140°F/60°C)
Heavy Duty Detergent
Tumble Dry Low (Max. 160°F/71°C)
Do Not Use Chlorine Bleach
Do Not Line-Dry in Sunlight
Moda-quilt® lining of: 100% Indura® Cotton Face and 100% Modacrylic Batting
caution / read before use
Flammable contaminants will reduce the thermal protection of any flame-resistant garment.
For maximum protection:
Wash your new garment before wearing and wash frequently thereafter to thoroughly remove potentially flammable contaminants.
Wearing undergarments is recommended with all flame-resistant garments.
The fabric in this garment is prone to excessive shrinkage. For best results, follow care instruction closely.
Garment Care
For correct fit, try garment on before washing and wearing.
Wash new garments before wearing and frequently thereafter.
Wash separately from other garments.
Machine Wash Hot
Heavy Duty Detergent
Line-Dry (Avoid Direct Sunlight)
PBI/Triguard™ Fiber content-50% DuPont Kevlar® aramid fiber and 30% Rayon and 20% Hoechst Celanese PBI Fiber.
caution / read before use
Flammable contaminants will reduce the thermal protection of any flame resistant garment.
For maximum protection:
Wash your new garment before wearing and after each subsequent wearing to thoroughly remove potentially flammable fabric processing aides / finishes, greases, oily soil and other flammable contaminants.
Wearing undergarments is recommended with all flame resistant garments.
Garment Care
For correct fit, try garment on before washing or wearing.
Wash new garments of PBI/Triguard™ before wearing and after each wearing.
Wash garments of PBI/Triguard™ separately from other garments.
Pre-treat heavily soiled and stained garments with commercial stain remover (non-chlorine containing)
Machine Wash, Hot Water (140°F/60°C)
Heavy Duty Detergent. (Wash pH 10 or lower.)
Tumble Dry Low (Max. 160°F/70°C)
Maximum Drying Time-30 Minutes
Remove Promptly
